3-Pack Came TOP-432 Gate Remote, 433.92MHz Fixed Code, 2-Channel
3-Pack Came TOP-432 Gate Remote, 433.92MHz Fixed Code, 2-Channel
Exclusive Discounts: Up to 8% OFF
- Buy 1 Item → Get 2% OFF
- Buy 2 Items → Get 5% OFF
- Buy 3+ Items → Get 8% OFF
- Notice: All products, any combination, auto applied at checkout.
Replacement Remote for Came TOP-432
A 3-pack of fixed-code replacement remotes for the Came TOP-432 range. Each remote runs on 433.92 MHz, has two channels, and reaches up to 164 ft in open areas. Batteries are included. Choose your handset model above — TOP-432NA, TOP-432EV or TOP-432EE.
Before You Buy: Fixed Code Only
This is a fixed-code remote.
It copies the signal from an existing fixed-code Came remote. It will not work with rolling-code or hopping-code systems.
You also need a working original remote to copy from. If your original is lost or dead, this remote cannot be paired on its own.
How to Pair It
Step 1 — Reset the new remote
- Press and hold buttons A and B at the same time until the LED flashes 3 times.
- Release button B and press it 3 times while holding button A down.
Step 2 — Copy the old remote
- Place the old and the new remote back to back, as close together as possible.
- Press button A on both remotes at the same time. When the LED on the new remote stops blinking and stays solid, the copy is complete.
To copy the second channel, repeat step 4 using button B on both remotes.
Keep the two remotes in contact the whole time — back to back, head to head, side by side or overlapping. Any gap between them is the most common reason a copy fails.
Specifications
| Specification | Detail |
|---|---|
| Frequency | 433.92 MHz |
| Coding | Fixed code — not rolling code |
| Channels | 2 |
| Buttons | 2 (A and B) |
| Range | Up to 164 ft in open areas |
| Dimensions | 2.68 × 1.26 × 0.51 in |
| Battery | 2 × CR2016 per remote, included |
| Pack size | 3 remotes |
Compatibility
Built for these three Came handsets only.
| Handset model (select above) | What you receive |
|---|---|
| Came TOP-432NA | 3 remotes for TOP-432NA |
| Came TOP-432EV | 3 remotes for TOP-432EV |
| Came TOP-432EE | 3 remotes for TOP-432EE |
This is an aftermarket replacement part. Came and the model names above are referenced only to describe compatibility.
Frequently Asked Questions
Is this a fixed-code or rolling-code remote?
Fixed code. It copies the signal of an existing fixed-code Came remote. It will not work with rolling-code or hopping-code systems.
Which model should I choose?
Match the model number printed on your existing remote: TOP-432NA, TOP-432EV or TOP-432EE. Use the selector above to pick that model.
What is the operating range?
Up to 164 ft in open areas with no obstacles. Indoors, or through walls and metal garage doors, expect a shorter range.
Do I need my old remote to pair this one?
Yes. The pairing is a copy process: the new remote learns the signal from a working original remote held against it. Without a working original, the remote cannot be paired.
What if the LED never turns solid during copying?
Start again from the reset step. Make sure the two remotes are touching or overlapping, and that both A buttons are pressed at exactly the same moment.
How many doors or gates can it control?
Two. The remote has two channels, so buttons A and B can operate two separate doors or gates.
How many remotes are in the pack?
Three identical remotes. Batteries are included.
Does it work with other Came models?
No. This remote is made for the TOP-432 range only. Some listings sell it as CAM TOP-432; CAM and Came are the same brand. If your handset carries a different model number, it is not covered.